|
hvacrdude1 (November 30, 1999 at 12:00 am)
HvacrTalk . com welcomes Techs contractors and consumers to join free and discuss and trade infor and learn meet others in the trade. good links and resources...all you need is a valid email to activate your account.
alhormaza (November 30, 1999 at 12:00 am)
what do you do when you get the high pressure reading(red code)??
chew211 (November 30, 1999 at 12:00 am)
can i use those freone tools on a mitsubishi mirage 2000
ronieboy44 (November 30, 1999 at 12:00 am)
Most R12 systems need to have at least 40-45 psi.low side while the AC pump is running.. I do sell DYI kits for your car..visit my ebay store and take a look..RC
lezbriddon (November 30, 1999 at 12:00 am)
Is 40 something pounds normal for an old r12 system, I have one but where I am no one will touch it so it looks like I will have to do a DIY refill, I dont think I have leaks, just old age, but was going to test with air, and check pressure a week later to see if it did leak, just was not sure of what a 'normal; static pressure was
ronieboy44 (November 30, 1999 at 12:00 am)
You are correct...Adding oil and repairing leaks are important.Use green UV dye to find leaks..
GPDAndrew (November 30, 1999 at 12:00 am)
One important bit of information is if your low on freon you have a leak, if you have a leak not only do you lose freon but you lose oil, lack of proper lubrication is a quick way to destroy a compressor. Leak needs to be found and fixed and proper amount of freon and oil needs to be added back to the system. |
